Unfortunately, in recent years, many manufacturers have started to eliminate the transmission fluid dipstick. Referred to as sealed units, these transmissions require a much more involved process to check fluid levels. The process often involves electronic testing devices, such as a computer scan tool. This puts checking the transmission fluid level beyond the capabilities of the average car owner. So if your car doesn't have a dipstick, you should have your local transmission shop or dealership check the transmission fluid level at least a couple times a year, even if you don't notice a problem with transmission operation.

WARNING: Checking the transmission fluid level requires working under the hood of your car with the engine running. This can be very dangerous if you aren't careful. It is highly recommended you bring your car to a trusted service center if you are experiencing problems with your transmission. However, if you wish to proceed, watch out for moving components, such as fans, fan belts, pulleys, etc. If you aren't comfortable with this procedure, always take your car to your local service station to have the transmission fluid checked.

If your vehicle is experiencing any issues, such as hesitating when it shifts gears or if it makes noises while shifting, you don't necessarily have to get a new transmission. It could be as straightforward as just checking your ATF, or Automatic Transmission Fluid.

Your transmission depends entirely on this distinctive fluid, hence a low fluid level can have a disastrous effect on transmission operation. We recommend you check the level at least once a month. This will enable you to catch a slow fluid leak you may not know you had, potentially saving a lot of money in damaged transmission parts. Your car's owners manual should provide a detailed description on how check your transmission fluid level. If you don't have an owner's manual, here's the basic procedure that will work on just about any car that has a transmission dipstick.

1. Make sure your car is on level ground.
2. Start the engine (and don't turn it off until finished!)
3. Bring the engine and transmission to normal operating temperature.
4. Hold your foot on the brake, and work the shifter slowly through the gears.
5. Put the shifter all the way back into park.
6. Set the parking brake.
7. Carefully open the hood.
8. Find the transmission dipstick.
9. Remove the dipstick, and wipe it off with a clean rag or paper towel.
10. Slide the dipstick all the way back down into the transmission fill tube.
11. Pull the dipstick back out, and check the fluid level against the markings on the end of the dipstick. It should be pinkish & almost clear but if it smells burnt or has particles in it, have a certified service center drain and change it.
12. If the transmission fluid is clear but doesn't reach the "Full" line on the dipstick, use a funnel to pour just enough transmission fluid down the dipstick tube to reach the line. Don't overfill!

REMEMBER: Always use the fluid recommended by the manufacturer. Also, if the transmission requires more than a quart, or is using fluid regularly, take your car in to have it checked for leaks.
If you're ever unsure of the procedure or where to find the transmission dipstick, check with your local certified service center. They'll be happy to show you where the dipstick is, and how to check the fluid level.